J.A.M_rogo
akaobi
Chinese | Japanese | Contact
aoobi
Environmental Management > Environmental Approach
Environmental Approach
2001　Start the challenging to Pb free connector Pb free connector
Pb in soldering was cut-down by changing surface finishing method to tin-reflow wire from soldering plated which was used for board to wire connector.

The first Pb free connector !
SVK connector
3.96mm pitch Board to Wire

2002　Expansion Pb free connector to all of models
Adopted the tin-reflow plated for all of connectors, based on the first Pb free connector of "SVK connector" of good result to the contact reliability and the implementation experiment.
SJH
SJH connector		 SMH
SMH connector		 SJW
SJW connector

2002　Launch the Eco Press machine Press machine
The servo press which was developed as next-generation press machine to replace the mechanical and the hydraulic type.This environmental friendly machine can contribute energy saving then it was named “Eco Press”. The servo motor system makes idling time near ZERO and enables easier and environment friendly operation. This product ultimately helps amount of energy saving and is also a recyclable 90% of parts as resource when it is scraped.

2004　Approach to ISO9001/14001 Certification at overseas plant
Subsidiary Japan Automatic Machine Technology (Huizhou) Ltd. Starting challenge to ISO9001/14001

2004 3 models Line up, Pb free solder support type of Full Automatic Crimping Machine
As wire harness environmental measurement, a soldering bath which is mounted on the Full Automatic Crimping Machines are all of Pb free corresponding.


shitaobi
J.A.M_rogo
 
  copy